Scope of milling machine maintenance operation
1. Cleaning of the bed and its components, cleaning of iron filings and sanitation of the surrounding environment< Br/>
2. Check each oil level, not lower than the oil mark, and add lubricating oil to each part; XK754A; Horizontal CNC bed milling machine

3. Cleaners, clamps, measuring tools< Br/>
Scope of milling machine's first maintenance operation
1. Clean and adjust the workbench, screw handle, and column inlay< Br/>
2. Check and adjust the clutch< Br/>
3. Clean the three-way guide rail and felt, and clean the inside and outside of the motor, machine tool, and accessories< Br/>
4. Check the oil circuit and add lubricating oil to all parts< Br/>
5. Tighten all screws< Br/>
Milling machine maintenance operation scope

1. Cleaning of the bed and its components, cleaning of iron filings and surrounding environmental hygiene, cleaners, clamps, and measuring tools< Br/>
2. Check each oil level, not lower than the oil mark, and add lubricating oil to each part< Br/>
Scope of weekend maintenance work for milling machines

1、 Cleaning
1. Disassemble and clean all oil felt pads< Br/>
2. Wipe each sliding surface and guide rail surface, wipe the workbench and horizontal, lifting screw, wipe the tool transmission mechanism and tool holder< Br/>
3. Wipe off all dead corners< Br/>
2、 Lubrication
1. Clean and unobstructed oil holes and add lubricating oil< Br/>
2. Add lubricating oil to each guide rail surface, sliding surface, and screw< Br/>
3. Check the fuel tank body and oil level of the transmission mechanism, and add oil to the elevation position< Br/>
3、 Tighten

1. Check and tighten the pressure plate and inlay screw< Br/>
2. Check and tighten the fixing screws of the slider, the tool transmission mechanism, the handwheel, the workbench bracket screws, and the fork top screw< Br/>
3. Check and tighten other loose screws< Br/>
4、 Adjust

1. Check and adjust the belt, pressure plate, and inlay strip for appropriate tightness< Br/>
2. Check and adjust the slider and screw assembly< Br/>
5、 Anti corrosion

1. Remove rust from all parts, protect the painted surface from collision< Br/>
2. Stop using, spare equipment guide rail surfaces, sliding screw handwheels, and other exposed areas that are prone to rusting should be coated with oil for corrosion prevention< Br/>
&Nbsp;